GoSwap Configurator
GoSwap Configurator is an Android app for setting up GoSwap CAN adapters from your phone. With it you change adapter parameters, watch live data from the car, update the firmware and record a CAN log.
Android Download for Android
How to install
- 1Tap “Download for Android”. Chrome will warn that the file might be harmful — it says this about any app file. Tap “Download anyway”.
- 2Open the downloaded file: menu ⋮ → “Downloads” → the GoSwap file.
- 3Allow installation from Chrome: “Settings” → turn on the switch. The install window comes back by itself.
- 4Tap “Install”.
- 5Do not tap “OK” in the Play Protect window “App blocked to protect your device” — “OK” cancels the installation. Tap “More details” → “Install anyway”. Play Protect says this about any app not from Google Play that it has not checked yet.
- 6Tap “Open”. If the app has downloaded an update, tap «Перезапустить» (Restart) — this puts it on the latest version.
What you need
- Android 7.0 or newer.
- For a cable connection — an OTG adapter (USB-C or micro-USB).
Video guides
What’s new
1.0.2· 15.10.2026
- The app is in three languages: Kazakh, English and Russian.
0.99.0· 13.10.2026
- Stability improvements.
0.98.9· 13.10.2026
- uFANv2 fan: the “Switch-on temperature” help shows the default values again, and the “CAN telemetry” help shows the signal table.
0.98.8· 13.10.2026
- uFANv2 fan: the A/C pressure sensor settings are visible again — the switch-on and maximum thresholds on the A/C tab, and the “Fan type” and “A/C mode” tiles.
0.98.6· 12.10.2026
- HEMI: the SPD tab shows the phone's GPS speed, so you can set up the speedometer while driving.
- Help for an output the adapter reads as an input: the jumper soldering spot is marked the same way as for the others.
All changes
0.98.3· 09.10.2026
- Toyota automatic transmission thermostat: the adapter manual is updated; the “TOYOTA 2005+” sensor — A750, A760, AB60 transmissions (LC200, 3UZ 6AT, 2GR, 3GR, 4GR).
0.98.2· 08.10.2026
- Added the Hilux / 1KD profile.
0.98.1· 07.10.2026
- The CAN “no link” hint now tells you what to check in the wiring: swapped CAN-H and CAN-L or the wrong bus.
- HEMI: shorter tile names and clearer settings help.
0.97.13· 06.10.2026
- Patrol Y61: clear names for the engine data sources.
0.97.12· 06.10.2026
- Interface improvements.
0.97.11· 06.10.2026
- Patrol Y61: selector wiring help with jumper photos; the O/D OFF button is on IN5.
0.97.10· 05.10.2026
- New adapter: Nissan Patrol Y61 instrument cluster (3UZ, UZ-UR, J120, MPX or analog engine).
0.97.9· 04.10.2026
- Interface improvements.
0.97.3· 28.09.2026
- Defender Puma / ANALOG: tachometer up to 60 pulses per revolution.
0.97.2· 28.09.2026
- Added the Defender Puma / ANALOG profile.
0.97.0· 25.09.2026
- CAN recording now works for several adapters at once from one phone.
0.96.9· 25.09.2026
- Added the VW T5 / Toyota SPD profile.
- Added the Tundra 2007 / 3UR-FE profile.
0.96.1· 24.09.2026
- Added the VAG 3.6 FSI + DSG profile.
0.93.4· 23.09.2026
- Functionality improvements.
0.88.4· 16.09.2026
- The fan test shows the temperature and the vehicle voltage.
- Other functionality improvements.
0.86.1· 12.09.2026
- The adapter firmware can now be updated right from the app.
0.83.0· 11.09.2026
- Interface refinements.
0.82.2· 09.09.2026
- Added the Toyota AT TEMP SW profile.
0.55.0· 27.08.2026
- Added the Toyota SPD/ODO profile.